How to Install

Support Bracket

Option 1:                                                                            

  On Wall Plate      (10.6”-42”)      

                                 1                   

       

  1. Drill holes within the chosen area of the wall according to the On Wall Plate dimensions.
  2. Place the raw plugs into the holes and screw the On Wall Plate into positionso it is attached to the wall.
  3. Set up power and signal circuit and the outlet.
  4. Simply offer the TV up to the On Wall Plate that is fixed on the wall. Line up the 4 x metal lugs on the On Wall Plate with the 4 x holes located on the back cover of TV and simply slide in.

                                                                

Option 2:  

  On Wall Bracket     (10.6”-42”)         

                                          

 

  1. Drill holes within the chosen area of the wall according to the On Wall Bracket dimensions.
  2. Place the raw plugs into the holes and screw the On Wall Bracket into positionso it is attached to the wall.
  3. Place theTV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the TV.
  4. Screw the 2 rails on the back of the TV.
  5. Set up power and signal circuit and the outlet.
  6. Simply offer the TV up to the On Wall Bracket that is fixed on the wall. Hook the 2 rails over the On Wall Bracket.

 

Option 3:    

  Embedded Bracket       (10.6”-55”)    

                              

      

  1. Create an opening within the chosen areaof the wall according to the Embedded Bracket dimensions. Leave enough space for the cables.
  2. Set up power and signal circuit and the outlet.
  3. Place the Embedded Bracketinto the recess and use the pilot holes to drill into the 
  4. Place the raw plugs into the holesthat have been drilled and screw the Embedded Bracket into position.
  5. Organize the cables and offer the TV up to the Embedded Bracketthat is fixed within the wall.
  6. Line up the 4 x metal lugslocated on the sides of the TV case with the 4 x channels located within the Embedded Bracket and simply push the TV into situ.

 

Option 4:

  Stand Base    (10.6”-15.6”)

           

              

  1. Take apart the base cover from the Stand Base.
  2. Place theTV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the TV.
  3. Line up the 4 holes on the Stand Base with the VESA holes on the TV back.
  4. Screw the Stand Base into the back of TV.
  5. Attach the base cover into position on the base.
  6. Organize the cables and set up power and signal circuit and the outlet.
  7. Adjust the position of the TVin various ways for maximum comfort.
  8. You may put the Stand Base either on the table or screwed on the wall.